Soverel 33 "Deviation" Sheets, Lines, & Halyards (BH v.6 11/15/05)
Item Material(s) Notes:

Cut LOA

Finish LOA Diagram

Size

Color
Material
Backstay fixed
3/16"
black
T-12
Large "luggage" tag splice on each end.
45'0"
42'0"
PDF
running
1/4"
white w/ blue flek
WS
Eye splice on one end, wip the other. Stopper Ball: TB14B or Blue 1/4"
Checkstays [qty 2]
"fixed"
3/16"

red & green

T-12

Large "luggage" tag splice on each end. On one end put Navtec T-ball N74306 fitting, on the other put W2676 schackle.
30'8"
27'8"
PDF
running
5/16"
white w/ r&b flek
WS
Eye splice on one end, wip the other. Bulk Splice (as big as possible between 12'0" - 18'8" from eye for self tailing winches)
26'5"
27'0"
Traveler Line [qty 2]
3/8"
red & green
TB
Eye splice on one end, wip the other.
16'7"
16'
 
Main Sheet corse
3/8"
blue
SM
Eye splice on one end, eye splice on the other. Insert scrap piece of 6' XLS core as bulking at location where sheet is at "max heavy air trim lockstitch in place." [ 5'6" - 14'0" from eye ]
51'0"
50'5"
PDF
fine
1/4"
blue
TB
Eye splice on one end, wip the other.
11'0"
10'5"
Vang
5/16"
red
Eye splice on one end, wip the other. Oringinal setup was with solf vang 8:1 lead on either side to a winch - system now modefied to Quickvang with 16:1, most cases vang can be tightened and relieased from either side. Can also be run to winch. Camcleat bracket heavily reinforced with aluminum angle brackets.
36'0"
35'5"
 
Cunningham
1/4"
blue
XLS
Eye splice on one end, wip the other.
36'0"
35'5"
 
Outhaul
red
XLS
Eye splice on one end, wip the other. Original setup was 7:1 internal Outhaul - system modified to 49:1 which can be adjusted by anyone in any conditions. - See diagram.
PDF
Foreguy
white w/ red flek
WS
Wip each end with lock stitching. Wip "middle" mark with contrasting color wipping twine.
2:1 system with tail lead to cam cleat in cockpit either side of house.
 
Main Halyard
cover
3/8"
blue
YT
See diagram.
Headboard Schackle: W581433 or RF660
72'6"
100'4"
PDF
core
1/4"
blue
V-12
103'6"
chafe
3/8"
blue
NC
4'0"
bulk
scrap core from 5/16" XLS or equiv.
6'2"
Jib Halyard
cover
5/16"
red
YT

See diagram.
Schackle: W2676 or Equiplite 4/6-3S-SL
Stopper Ball: TB516R or R191R Red 5/16"

85'7"
101'10"
PDF
core
3/16"
red
V-12
105'0"
chafe
5/16"
red
NC
4'0"
bulk
scrap core from 5/16" XLS or equiv.
6' 2"
Spinnaker Halyard
cover
5/16"
green
YT
See diagram.
Schackle: W2676 or Equiplite 4/6-3S-SL
Stopper Ball: TB516G or R191G Green 5/16"
95'8"
118'0"
PDF
core
3/16"
green
V-12
121'2"
chafe
5/16"
green
NC
4'0"
bulk
scrap core from 5/16" XLS or equiv.
6'2"
Topping Lift
cover
5/16"
black
YT
See diagram.
Schackle: W2676 or Equiplite 4/6-3S-SL
58'5"

80'4"

PDF
core
3/16"
grey
S-12
83'6"
Genoa Sheets [qty 2]
sheet
3/8"
white w/ red or green flek
WS
IC splice spectra with the warpspeed. Wip end of warpspeed. Splice Equiplite 4/6-3S-SL at end of spectra. This is a two part spliced line rather than stripping the line because you can replace the "working end" section and keep the covered "tail end" section for many years.
44'0"
46'0"
 
ends
3/16"
red or green
S-12
6'0"
Spinnaker Sheets
5/16"
red & green
WS
Strip Back 11'0", splice on W2773 or Equiplite 4/6-3S-SL fitting and wip the other end.
70'0"
69'5"
 
Spinnaker Sheet [light air]
1/4"
any
P-12
Splice on Lewmar Nab Shackle or Equiplite 4/6-3S-SL fitting and wip the other end. Rarely use this but it has the same feel as heaver sheets, floats, and is probably strong enough to use up to 12 kts - not used for guy!)
50'0"
49'5"
 
Spinnaker Twings [qty 2]
5/16"
red
WS
One end wipped with Stopper Ball: any color? Other Strip back 3'8" and end eye splice through a Harken Ti-Lite 29mm Carbo Single Block HK351
18'7"
18'0"
 
Fraculator
cover
grey
S-12

Large "luggage tie" eye splice on each end. Shockcoard inserted, cover "scrunched up" and Shockcoard lock stitched at each end. One eye to have scrap cover material to in loop, as chafing material to be passed through forestay turnbuckle. Line is then passed through genoa pre-feeder and then W2676 shackle is "looped" on.

8'5"

~5'4"
streached

 
core
any

SC

2'6"
 
 
 
Legend:
   
NC
Nomex Cover by Marlow
P-12
"Waterski Rope" Hollow Braid Polypropylene Rope

S-12

"Amsteel Blue by Samson" - 12 strand hollow braid 100% SK 75 Dyneema - spectra
SC
"Shock Cord"
SM
"Swiftcord by Mafoli" - soft composite braided SK75
T-12
"Tech-12" Technora 12 strand hollow braid
TB
"Trophy Braid"
V-12
"Yale Vectrus 12" Vectran 12-Strand single braid.
WS
"Sampson Warpspeed" Polyester cover over 12 strand hollow braid SK75 Dyneema core.
XLS
"XLS by Samson" Polyester cover / polyester core
YT

"Yale Tale" cover only - length "shrinks" about 10% when covering a halyard. Order two sizes up e.g. 3/16" -> 5'16"